Loge (S/2006 S 5)

back to Outer Saturnian Moons

Loge is ∼5 kilometers in size and thus one of the “mid-sized” Irregular moons of Saturn. It has been discovered in 2006 joint with eight other outer moons. Loge’s mean distance to Saturn is ∼23 million kilometers, with one revolution around the planet on a retrograde orbit requiring 3 years, 7 months and 1 week.

From our Cassini measurements, the Loge lightcurve was found to be very shallow and thus difficult to discern from the data noise. Therefore, the value of ∼6.9 h for the rotation period is only tentative.

Table of contents

(1) Astronomical and physical properties

Fig. (left): Short animation of Cassini images of Loge while moving through constellation Libra on 22/23 Feb 2015 (21 frames; time span: 3:04 h; exposure times: 460 sec; range: 18.5 million km; Cassini orbit: rev 212). In the first image, the object is marked by a black cross. The background stars move through the field of view because the camera of the fast moving Cassini spacecraft was tracking Loge, and they appear smeared because of the long exposure. The slight horizontal jitter of Loge is due to improper tracking at the arcseconds level. Flickering bright spots or streaks stem from cosmic-ray hits on the camera’s CCD detector, fixed bright or dark pixels are incorrectly calibrated hot or cold pixels on the CCD, respectively. The space background, in reality pitch black, is displayed in dark gray because this makes visibility of the object easier. Image IDs: N1803341947 to N1803352516.

Fig. (right): Lightcurve of Loge from Cassini imaging data obtained on 21 and 22 Feb 2015 (12° observation phase angle; Cassini orbit rev 212). The determined rotation period is uncertain because of the very low lightcurve amplitude which makes a discrimination of different maxima and minima difficult. The orange diamond sign indicates the very first measurement of the observation. Adapted from Denk and Mottola (2019).

This page is intended to compile (much of) our knowledge of Loge in compact form. Its main focus will lie on the documentation of my Cassini-ISS work (observation planning and data analysis), but will also provide general information obtained from other work, like discovery circumstances and orbital and physical parameters. It will not include the raw data (images or spectra) taken by the Cassini spacecraft, these are available at NASA’s Planetary Data System (PDS). For further reading on Loge and on Irregular moons of Saturn in general, see the reference list at my outer-Saturnian moons page.

This website is still in the early stages of development. As soon as papers will be reviewed or other information will be processed appropriately, more content will be added. I will remove this note when the page will be close to completion.

Last update: 20 May 2023 — page content is best displayed on a screen at least 1024 pixels wide


(1) Astronomical and physical properties

Moon name Saturn range Orbit period Orbit direction Size Rotation period Discovery year
Loge
 million km
 years
retrograde
∼ 
 km
∼ 
h ?
2006

Basic information about Loge is offered in tabular form:
(1A) Designations and discovery circumstances
(1B) Orbit parameters
(1C) Physical parameters (body properties)
← Tables (1A) to (1C) in ASCII format

Most fundamental values are highlighted in red. The notes offer explanations, calculations, accuracies, references, etc. The data were obtained from spacecraft as well as from ground-based observations.

(1A) Designations and discovery circumstances
Moon name(1) Loge IAU number(3) Saturn XLVI First observation date(7) 05 Jan 2006
Moon abbrev. (TD)(2) Log Provisional desig.(4) S/2006 S 5 Announcement date(7) 30 Jun 2006
SPICE ID(5) 646 IAU circ. announcement(7) no. 8727
Also-used label(6) S46 Discoverers(8) S. Sheppard et al.

Notes for Table 1A:

(1) Loge’s name was announced on 05 Apr 2007 in IAU circ. 8826. It was named after Logi, a fire giant (god and personification of fire) in Norse mythology, who was a son of Fornjót, brother of Ægir (sea giant) and Kári (god of the wind), husband of fire giantess Glöð, and father of Eisa and Eimyrja.

(2) I use this 3-letter abbreviation in the diagrams of my publications simply for practicability reasons. These have no offcial character.

(3) Moon numbers are assigned by the International Astronomical Union (IAU)’s Committee for Planetary System Nomenclature. For satellites, Roman numeral designations are used.

(4) Designation given to the object in the first announcement; the guidelines are explained here.

(5) SPICE is a commonly-used information system of NASA’s Navigation and Ancillary Information Facility (NAIF). It assists engineers in modeling, planning, and executing planetary-exploration missions, and supports observation interpretation for scientists. Each planet and moon obtained a unique SPICE number.

(6) ‘S’ for ‘Saturnian moon’ plus the roman numeral designation in arabic numbers are often-used labels for satellites. Not sure how official that is.

(7) The date of the photography wherein the object was spotted for the first time is given in the IAU circular released on the announcement date.

(8) The discoverer team included: Scott SheppardDavid Jewitt, and Jan Kleyna.

(1B) Orbit parameters
Orbit direction(1) retrograde Group member(2) Norse Dynamical family(3) Ymir
Periapsis range(4) 18.77 ⋅ 106 km Semi-major axis(5) 23.059 ⋅ 106 km Apoapsis range(6) 27.35 ⋅ 106 km
Semi-major axis(7) 382 R Semi-major axis(8) 0.154 au Semi-major axis(9) 0.352 RHill
Orbit eccentricity(10) 0.186 Orbit inclination(11) 167.7° Inclination supplemental angle(12) 12.3°
Orbital period(13) 1314.8 d Orbital period(14) 3 y 7 m 1 w Mean orbit velocity(15) 1.28 km/s

Notes for Table 1B:

(1) Prograde (counterclockwise as seen from north) or retrograde (clockwise as seen from north)

(2) Norse, Inuit, or Gallic

(3) Classification based on the a,e,i space in Fig. 1 and Table 2 in Denk et al. (2018)

(4) $r_{Peri}=a\cdot(1-e)$

(5) Orbit semi-major axis a, from JPL’s Solar System Dynamics Planetary Satellite Mean Elements website

(6) $r_{Apo}=a\cdot(1+e)$

(7) Saturn radius R = 60330 km (100 mbar level)

(8) Astronomical Unit 1 au = 149 597 870.7 km

(9) Saturn’s Hill sphere radius $R_{Hill}=\sqrt[3]{m_♄/3m_☉}\cdot r_{♄↔☉}$= ∼65 ⋅ 106 km = ∼1085 R♄ = ∼3° as seen from Earth at opposition (with mass of Saturn m = 5.6836 ⋅ 1026 kg and perihel range Saturn↔Sun r♄↔ = 1.353 ⋅ 109 km)

(10) Orbit eccentricity e, from JPL’s Solar System Dynamics Planetary Satellite Mean Elements website

(11) Orbit inclination i, from JPL’s Solar System Dynamics Planetary Satellite Mean Elements website

(12) Orbit “tilt” or inclination supplemental angle i’ = i for prograde moons; i’ = 180°−i for retrograde moons

(13) From JPL’s Solar System Dynamics Planetary Satellite Mean Elements website

(14) Value from (13) in units of years, months, weeks

(15) $v=\sqrt{Gm_♄/a}$ (Gravitational constant G = 6.6741 ⋅ 10−20 kmkg−1 s−2 )

(1C) Physical parameters
Mean size(1) 5 $^{+1½}_{−¾}$ km Min. equatorial axes ratio(4) 1.04 Mass(6) ∼ 3 ⋅ 1013 kg
Mean radius(2) ∼ 2.4 km Axes radii (a × b × c)(5) unknown Mean density(7) 0.5 g/cm3 (?)
 Equatorial circumference(3)  ∼ 15 km Surface escape velocity(8) ∼ 3 km/h
Rotation period(9) 6.9 h ? +/- (9) 0.1 Spin rate(9) 3.5 d−1 ?
Spin direction(10) unknown Pole dir. (ecliptic longitude λ)(12) unknown Pole direction (geocentric, RA)(13) unknown
Seasons(11) unknown Pole dir. (ecliptic latitude β)(12)  unknown Pole direction (geocentric, Dec)(13)  unknown
Absolute visual magnitude(14) ∼ 15.3 mag Apparent vis. mag. from Earth(15) 24.6 mag Best apparent mag. for Cassini(16) 16.2 mag
Color(17) ? Albedo(18) 0.06 (?)
Hill sphere radius(19) ∼ 480 km Hill sphere radius(20) ∼ 200 rLog

Notes for Table 1C:

(1) Determined from absolute visual magnitude H (see note (14)). The conversion from H to size (diameter of a reference sphere) was calculated through $D=1 \text{ au}\cdot \frac{2}{\sqrt{A}}\cdot 10^{−0.2·(H−M_☉)}$; with solar apparent V magnitude M = −26.71 ± 0.02 mag and Astronomical Unit 1 au = 149 597 870.7 km. For Loge’s albedo, see note (18). Due to the uncertain input values, a size determined this way may be uncertain to ∼ −15/+30% (for A ± 0.02 and H ± 0.1).

(2) Half the diameter value. While the diameter is the intuitive size number, the radius r is mainly used in formulas to calculate other quantities. Important: While the given number is the formal result from the equation of note (1), the true precision is much lower (also see note (1)).

(3) Estimated under assumption of a spherical equatorial circumference.

(4) Determined from the range between minima and maxima of a lightcurve obtained at low phase angle (from Table 3 in Denk et al. (2018)).

(5) Here, a is the long equatorial, b the short equatorial, and c the polar axis dimension of the reference ellipsoid. Unknown because no shape model is available yet.

(6) The mass is a very rough guess, estimated through density ρ and volume $\frac{4\pi}{3}r^3$; see notes (7) and (2).

(7) The density of Loge is not known, the given number is speculative. There are indications from other Saturnian Irregular moons that these objects have quite low densities (well below 1 g/cm3), similar to comets or some of the inner small moons of Saturn. However, a higher density, maybe up to 2.5 g/cm3, cannot be ruled out.

(8) $v_{esc}=\sqrt{\frac{2GM}{R}}$; very rough guess as well since it depends on Loge’s mass (note (6)) and radius (notes (1) and (2)) which are not well known. = 6.674 · 1011 mkg−1 s−2 (Gravitational constant).

(9) Rotation period P and error determined with Cassini data; from Table 3 in Denk and Mottola (2018). The question mark indicates that the value is tentative only, see the lightcurves section below for details. The spin rate is 24/P, measured in units of one per day.

(10) Valid entries: Prograde (counterclockwise as seen from north), retrograde (clockwise as seen from north), ‘lying on the side’ (pole direction almost perpenticular to ecliptic pole), or ‘unknown’.

(11) Valid entries: “None” (rotation axis points close to one of the ecliptic poles), “moderate” (rotation axis is moderately tilted), or “extreme” (rotation axis is highly tilted, points somewhere close to the ecliptic equator), or ‘unknown’.

(12) —

(13)

(14) From Table 2 in Denk et al. (2018); the number may be uncertain by several tenths of magnitude. The absolute visual magnitude HV is the magnitude (brightness) of an object (in the visible wavelength range) if located 1 au away from the sun and observed at 0° phase angle (i.e., in this definition, the observer virtually sits at the center of the sun). The magnitude scale is logarithmic, with an object of 6th mag being 100x darker than a 1st mag object.

(15) Apparent visual magnitude V; from Table 2 in Denk et al. (2018).

(16) From Table 2 in Denk and Mottola (2018). Given is the best apparent magnitude as seen from Cassini at a time when an observation took place.

(17)

(18) Might vary by ±0.03; see discussions in Grav et al. (2015) and Denk et al. (2018).

(19) Hill radius at periapsis under the assumption of the given density (see note (7)). The number would be larger for a higher density, or lower for a lower density.

(20) Hill radius at periapsis in Loge-radius units. With $R_{Hill}=\sqrt[3]{4\pi\rho_{Log}/9m_♄}\cdot r_{Log↔♄}$, this number only depends on the object’s distance to the central body (Saturn; linear dependency) and on the object’s density (proportional to the cubic root; see also note (7)).


© Tilmann Denk (2023)